Hioki IM3570 - Page 28

1.3 Screen Configuration and Operation
20
Continuous Measurement Mode
Basic setting
Removes item from targets for
continuous measurement(p. 266)
Sets item as target for continuous
measurement(p. 266)
Removes all items from targets for
continuous measurement(p. 266)
Sets all items as targets for continuous
measurement(p. 266)
Displays panel information(p. 266)
Initial screen is displayed.
Trigger setting (p. 270)
Stops continuous measurement (p. 271)
Application settings
Display timing setting (p. 269)
Initial screen is displayed.
LCD setting (p. 272)