Hioki IM3570 - Page 311

7.5 Calculating Values Scaling
303
7
Chapter 7 Error Compensation
3
Select the compensation coefficient of the
parameter you want to change.
The parameters and compensation coefficient numbers
correspond as shown below.
4
Press .
Scaling Compensation Setting
Compensation Coefficient Setting
Parameter 1
Parameter 2
Parameter 3
Parameter 4
Use the numeric keypad to set compensation
coefficient A.
Settable range: -999.9999 to 999.9999
To return to the previous screen without making any
change to the set value, press the key when the
screen is in the state with nothing being displayed (the
state after pressing the key).
5
Compensation Coefficient Setting