Chapter 5 Configuring the Meter
Configure – Measure Tab
66 DSAM Help User Guide Rev. 001
6 Press ENTER.
7 Using the arrow keys and the alphanumeric keypad, edit the
value.
OR
8 Using the arrow keys, select an option.
9 Press ENTER.
10 Press the OK softkey.
Figure 56 Configure – Other Settings
Table 25 Other Settings Parameters
Name Description
CPE Roving MAC
Address
The roving MAC (Media Access Control)
address for the Customer Premises Equip-
ment (CPE) in hexadecimal format.
Cable Modem
Roving MAC
Address
The roving MAC address for the Cable Modem
in hexadecimal format.
MTA Roving MAC
Address
The roving MTA (Multimedia Terminal Adapter)
MAC address for VoIP in hexadecimal format.
DOCSIS Configu-
ration
Select Range Only, Range and Registration,
or Registration with CPE Initialization for DOC-
SIS configuration. The default value is Regis-
tration with CPE Initialization.
21128026 R001 DSAM Help User Guide.book Page 66 Thursday, February 5, 2009 2:02 PM