JDS Uniphase DSAM-3600 - Figure 97 Access - Create New Work Folder; Purging Synchronized Folders; Deleting a Folder

Chapter 6 Access Mode
Access – Files Tab
104 DSAM Help User Guide Rev. 001
4 Press ENTER (Figure 95 on page 103).
5 Press the Folders softkey.
6 Using the arrow keys, select New.
7 Press ENTER.
8 Using the arrow keys and alphanumeric keypad, type the new
folder name.
9 Press the OK softkey.
Deleting a Folder To delete a folder
1 Press Access.
2 Press the Files softkey (Figure 94 on page 102).
3 Using the arrow keys, select Work Folders.
4 Press ENTER (Figure 95 on page 103).
5 Press the Folders softkey.
6 Using the arrow keys, select the folder you wish to delete.
7 Using the arrow keys, select Delete.
8 Press ENTER.
The folder name is removed from the list.
Purging Synchronized
Folders
You can purge synchronized folders (folders with a synchronize icon)
all at once.
To purge synchronized folders
1 Press Access.
Figure 97 Access – Create New Work Folder
21128026 R001 DSAM Help User Guide.book Page 104 Thursday, February 5, 2009 2:02 PM