JDS Uniphase DSAM-3600 - Creating a Folder; Figure 96 Access - Open a File; Figure 95 Access - Work Folders

Chapter 6 Access Mode
Access – Files Tab
DSAM Help User Guide Rev. 001 103
4 Press ENTER.
5 Using the arrow keys, select a folder.
6 Press the Open softkey or ENTER.
7 Using the arrow keys, select a file.
8 Press the Open softkey or ENTER.
Creating a Folder To create a new folder
1 Press Access.
2 Press the Files softkey (Figure 94 on page 102).
3 Using the arrow keys, select Work Folders.
Figure 95 Access – Work Folders
Figure 96 Access – Open a File
21128026 R001 DSAM Help User Guide.book Page 103 Thursday, February 5, 2009 2:02 PM