Chapter 5 Configuring the Meter
Configure – Channel Plan Tab
DSAM Help User Guide Rev. 001 85
The minimum number of channels is one. The maximum number
of channels is twelve.
11 Press the Done softkey.
Configuring Channels
for Tilt
To configure channels for Tilt
1 Press Configure.
2 Press the Chan Plan softkey.
3 Using the arrow keys, select Downstream Plans.
4 Press ENTER.
5 Using the arrow keys, select the plan you want to work with.
6 Press the Plan softkey.
7 Using the arrow keys, select Tilt Channels.
8 Press ENTER.
9 Using the arrow keys, select each channel you want to include.
10 Press the Select softkey.
The minimum number of channels is one. The maximum number
of channels is 12.
11 Press the Done softkey.
Configuring Access
Channels
This function lists all DOCSIS channels and lets you indicate which
channels to use when browsing and which to use for synchronization.
Figure 72 Configure – Select Tilt Channels
21128026 R001 DSAM Help User Guide.book Page 85 Thursday, February 5, 2009 2:02 PM
To Next Page
Loading...
Need help?
General
