JDS Uniphase DSAM-3600 User Manual

Chapter 8 Measure Mode – Basic Tab
Saving Results
DSAM Help User Guide Rev. 001 201
Opening a Saved
File
Opening a saved file is not applicable to AutoTest results.
To open a saved file
1 Press the File softkey.
2 Using the arrow keys, select Open.
3 Press ENTER.
4 Using the arrow keys, select the folder that contains the file you
want to open.
5 Press the Open softkey.
6 Using the arrow keys, select the file you want to open.
7 Press the Open softkey.
NOTE
When you attempt to open a file within a mode, only saved files of
that mode type are displayed in the file folder.
21128026 R001 DSAM Help User Guide.book Page 201 Thursday, February 5, 2009 2:02 PM

JDS Uniphase DSAM-3600 Specifications

General

Brand	JDS Uniphase
Model	DSAM-3600
Category	Measuring Instruments
Language	English