JDS Uniphase DSAM-3600 - Figure 98 Access - Purge Confirmation; Renaming a Folder

Chapter 6 Access Mode
Access – Files Tab
DSAM Help User Guide Rev. 001 105
2 Press the Files softkey (Figure 94 on page 102).
3 Using the arrow keys, select Work Folders.
4 Press ENTER (Figure 95 on page 103).
5 Press the Folders softkey.
6 Using the arrow keys, select Purge.
7 Press ENTER.
A confirmation screen is displayed.
8 Press the Yes softkey.
All synchronized folders disappear from the list.
Renaming a Folder To rename a folder
1 Press Access.
2 Press the Files softkey (Figure 94 on page 102).
3 Using the arrow keys, select Work Folders.
4 Press ENTER (Figure 95 on page 103).
5 Using the arrow keys, select the folder you want to work with.
6 Press the Folders softkey.
7 Using the arrow keys, select Rename.
8 Press ENTER.
Figure 98 Access – Purge Confirmation
21128026 R001 DSAM Help User Guide.book Page 105 Thursday, February 5, 2009 2:02 PM