Chapter 9 Measure Mode – Service Tab
DOCSIS
220 DSAM Help User Guide Rev. 001
Restoring Ping Test
Defaults
To restore the default values for Packet Size and Time Between Pings.
1 Press the Settings softkey.
2 Using the arrow keys, select Restore Defaults.
3 Press ENTER.
Adding Ping IP
Addresses
To add an IP address
1 Press the Settings softkey.
2 Using the arrow keys, select Add IP.
3 Press ENTER.
4 Using the arrow keys and the alphanumeric keypad, type an IP
address.
5 Press the OK softkey.
Modifying Ping IP
Addresses
To modify an IP address
1 Using the arrow keys, select IP Address.
2 Press ENTER.
Table 45 Ping Parameters
Name Description
IP Address Select from a list of up to ten of the most recently used
IP addresses.
Packet Size
(bytes)
Options are 64, 128, 256, 512, 1024, or 1518 (in
bytes). The default value is 64 bytes.
Time Between
Pings
Options are 0 ms, 10 ms, 25 ms, 50 ms, 100 ms, 1 sec,
2 sec, or 5 sec. The default value is 1 second.
NOTE
The ten stored IP Addresses are not affected by the Restore
Defaults menu item.
NOTE
The last added IP address is placed on the top of the option list.
21128026 R001 DSAM Help User Guide.book Page 220 Thursday, February 5, 2009 2:02 PM
To Next Page
Loading...
Need help?
General
