Chapter 7 AutoTest Mode
AutoTests Tab
DSAM Help User Guide Rev. 001 141
Understanding Proof
of Performance
Results
Figure 133 AutoTest – Proof of Performance
NOTE
If you chose the wrong limit set before conducting the test, press
the Limits softkey and select a different limit set to view your test
results in relation to a different limit set without rerunning the test.
Figure 134 AutoTest – Video AutoTest Results
Table 43 Home Certification Test Results
Name Description
Overall Results This area displays the overall pass/fail results for
the test, the limit set applied (if applicable), and the
currently selected channel.
Overall Results
Overall Channel Results
Individual Test Results
21128026 R001 DSAM Help User Guide.book Page 141 Thursday, February 5, 2009 2:02 PM
To Next Page
Loading...
Need help?
General
