JDS Uniphase DSAM-3600 - Configuring Autotest for Video Channels; Figure 77 Configure Mode - Cable Modem Autotest; Figure 76 Configure - Select an Autotest

Chapter 5 Configuring the Meter
Configure – Channel Plan Tab
DSAM Help User Guide Rev. 001 89
5 Using the arrow keys, select Cable Modem.
6 Press the Configure softkey.
7 Using the arrow keys, select a DOCSIS channel you want to
include or exclude.
8 Press the Select softkey.
9 Press the Done softkey.
Configuring AutoTest
for Video Channels
To configure AutoTest for video channels
1 Press Configure.
2 Press the Chan Plan softkey.
Figure 76 Configure – Select an Autotest
Figure 77 Configure Mode – Cable Modem AutoTest
21128026 R001 DSAM Help User Guide.book Page 89 Thursday, February 5, 2009 2:02 PM