Chapter 6 Access Mode
Access – Browser Tab
112 DSAM Help User Guide Rev. 001
Error Messages
When an error occurs in WFA Browser mode, one of the following error
messages appear:
– Could not lock to the downstream channel
– The meter could not range over the browser DOCSIS channel
– The meter was unable to register with the CMTS
– An internal DOCSIS error occurred
– The meter lost communication with the CMTS
Local Browser
The Local Browser function enables you to open a saved browser
page. Since it does not connect to an Ethernet or RF network, no
network or server configurations are required.
Keypad and pointer functions in the Local Browser are the same as
those in the WFA Browser. See “Graphical Pointer” on page 110 and
“Softkeys” on page 110 for a full description how to use the interface.
Accessing the Local
Browser
To access the local browser
1 Press Access.
2 Press the Browser softkey.
3 Using the arrow keys, select Local Browser.
4 Press ENTER.
Figure 104 Access – Browser Tab: Local Browser
21128026 R001 DSAM Help User Guide.book Page 112 Thursday, February 5, 2009 2:02 PM
To Next Page
Loading...
Need help?
General
