Chapter 6 Access Mode
Access – Files Tab
106 DSAM Help User Guide Rev. 001
The folder rename screen is displayed.
9 Using the arrow keys and the alphanumeric keypad, type a new
name.
10 Press the OK softkey.
Viewing Folder
Properties
To view folder properties
1 Press Access.
2 Press the Files softkey (Figure 94 on page 102).
3 Using the arrow keys, select Work Folders.
4 Press ENTER (Figure 95 on page 103).
5 Using the arrow keys, select the folder you want to work with.
6 Press the Folders softkey.
7 Using the arrow keys, select Properties.
8 Press ENTER.
Synchronization
The Synchronize function enables you to synchronize your folders
(and the files in them) with optional JDS Uniphase Corporation Test
Productivity Pack (TPP) software. Through synchronization, this soft-
ware can receive, transfer, manage, and archive the measurement
data of multiple DSAM meters.
Figure 99 Access – Folder Rename
21128026 R001 DSAM Help User Guide.book Page 106 Thursday, February 5, 2009 2:02 PM
To Next Page
Loading...
Need help?
General
