Chapter 5 Configuring the Meter
Configure – Measure Tab
76 DSAM Help User Guide Rev. 001
5 Using the arrow keys and the alphanumeric keypad, edit the
value.
6 Press the OK softkey.
Deleting a TPC Plan
To delete a TPC plan
1 Using the arrow keys, select the TPC plan you want to delete.
2 Press the File softkey.
3 Using the arrow keys, select Delete.
4 Press ENTER.
5 Press the Yes softkey to confirm.
Viewing a Graphical
Summary
To view a graphical summary
1 Using the arrow keys, select the TPC plan you want to view.
2 Press the Summary softkey.
The TPC Summary screen is displayed.
3 Press the Forward softkey to view more of the plan.
NOTE
If the TPC plan is set to Off, the Delete option is disabled.
Figure 65 Configure – TPC Summary
21128026 R001 DSAM Help User Guide.book Page 76 Thursday, February 5, 2009 2:02 PM
To Next Page
Loading...
