Appendix B Safety Instructions
Important Safety Instructions
DSAM Help User Guide Rev. 001 305
Battery Safety
Follow these safety precautions to reduce the risk of fire, shock, or
personal injury and to avoid damage to the DSAM Product Family
Series battery:
These safety precautions apply to the use of the Li-Ion battery
supporting the DSAM Product Family Series meter.
1 Power the meter only with battery types approved for use by JDS
Uniphase Corporation.
2 Do not disassemble or attempt to service the battery.
3 Do not place the battery on a conductive surface.
4 Do not allow metal objects to touch the battery contacts.
5 Charge the battery only with the specified charger.
6 Keep the battery away from heat sources near or above 60° C
(140° F).
7 Operate and store the battery only within the following ranges:
Li-Ion
–Charging
0 to +45° C
(+32° to +113° F)
– Discharge
-20° to +60° C
(-4° to +140° F)
– Short term storage (30 days or less)
-20° to +60° C
(-4° to +140° F)
– Long term storage (90 days or less)
-20° to +45° C
(-4 to +113° F)
– Long term storage (1 year +)
-20° to +20° C
(-4° to +68° F)
WARNING
Do not crush, penetrate, mutilate, or dismember the battery in any
way.
21128026 R001 DSAM Help User Guide.book Page 305 Thursday, February 5, 2009 2:02 PM
To Next Page
Loading...
Need help?
General
