Chapter 5 Configuring the Meter
Configure – General Tab
DSAM Help User Guide Rev. 001 35
5 Using the arrow keys, select My Name.
6 Press ENTER.
7 Using the arrow keys and the alphanumeric keypad, edit the
value.
8 Press ENTER.
9 Press the OK softkey.
Date and Time
Use the Set Date and Time screen to set the current date and time.
Figure 20 Configure – Enter Your Info
NOTE
Press the “1” key repeatedly to access a variety of special charac-
ters (- + # @ * etc.), then press ENTER.
Table 15 “About Me” Parameters
Name Description
My Name Your name as it will appear in TPP.
My Employee ID Your employee ID as assigned in TPP.
NOTE
The Set Date and Time screen may be locked by TPP. Also, TPP
may be configured to update the date and time upon synchroniza-
tion.
21128026 R001 DSAM Help User Guide.book Page 35 Thursday, February 5, 2009 2:02 PM
To Next Page
Loading...
Need help?
General
