Chapter 5 Configuring the Meter
Configure – Measure Tab
68 DSAM Help User Guide Rev. 001
3 Using the arrow keys, select the parameter you want to edit.
4 Press ENTER.
5 Using the arrow keys and the alphanumeric keypad, edit the
value.
OR
6 Using the arrow keys, select an option.
7 Press the OK softkey.
Figure 57 Configure – Measure Tab: VoIP Check
NOTE
For more accurate results, JDS Uniphase Corporation recommends
that you set up your own VoIPCheck server close to your gateway.
Figure 58 Configure – VoIPCheck
21128026 R001 DSAM Help User Guide.book Page 68 Thursday, February 5, 2009 2:02 PM
To Next Page
Loading...
Need help?
General
