Appendix B Safety Instructions
Important Safety Instructions
304 DSAM Help User Guide Rev. 001
Important Safety Instructions
Follow these safety precautions to reduce the risk of fire, shock, or
personal injury and to avoid damage to the DSAM Product Family
Series meter and its power components.
1 Read all instructions in this section regarding the meter, battery
and universal power supply.
2 Keep these instructions for future reference.
3 Pay attention to all warnings and safety precautions.
Meter Safety
Follow these safety precautions to reduce the risk of fire, shock, or
personal injury and to avoid damage to the DSAM Product Family
Series meter:
1 Use the meter and its power components only as directed by the
instructions in this guide or as directed by other resources
provided by JDS Uniphase Corporation.
2 When powering the meter, maintain the secure connection of each
power component.
3 Use only JDS Uniphase Corporation-specified components to
power and conduct measurements with this meter.
4 Keep the meter cavity that holds the battery and its battery
contacts clean.
5 Use only a dry cloth to clean the meter.
6 Avoid using the meter or its power components during an elec-
trical storm.
WARNING
– Do not disassemble the meter.
– Do not attempt to service this product yourself. There are no
user-serviceable parts inside. Contact the appropriate JDS
Uniphase Corporation representative for meter repair or calibra-
tion.
21128026 R001 DSAM Help User Guide.book Page 304 Thursday, February 5, 2009 2:02 PM
To Next Page
Loading...
Need help?
General
