Global, Media: FUNCTION Swap Key Setup
181
If you selected two or more keys in the From Key field, their
settings will be copied to the keys starting at the To K e y and
continuing upward.
Swap Key Setup
Swap Key Setup is available on the DRUMKIT pages.
This function exchanges (swaps) the settings of one key with the
settings of another key.
Use Source Key 1 and Source Key 2 to specify the keys whose
settings you want to swap.
Load selected
Load selected is available on the MEDIA> FILE page.
This loads the file or directory selected in the directory window
into the internal memory.
1. In the directory window, select the file or directory that you
want to load.
2. Select Load selected.
A dialog box will appear. The dialog box that appears will depend
on the file you are loading. Specify the various items as necessary.
1) Load .PCG
Data in the .PCG file will be loaded.
2) Load Programs
All program data from a .PCG file will be loaded.
3) Load Program Bank [Bank A...F, UA...UD]
All program data from the selected bank will be loaded into the
bank you specify.
In To, select the loading destination bank.
The load-destination can only be bank U or the same bank as
the load-source bank.
4) Load a Program
Data for the selected program will be loaded into the program
number you specify.
1. If you wish to load a program other than the one already
selected, use the “From”(upper field) to select the program
that you wish to load.
Note: The selected program can be played from the keyboard even
before you load it. This is convenient when you want to audition
the program before loading. For more information, please see the
“PCG Preview” section on page 175.
2. In “To” , (lower field) select the bank and program where
the data will be loaded.
The load-destination can only be user bank.
To Next Page
Loading...
