KRONE ISOBUS Terminal
113
Pos: 48.36 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI-Pr ess-Wickelvorric htung/Grundbild/Gru ndbild @ 52\mod_128929 5572640_78.docx @ 502890 @ @ 1
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11F11
F12
CC000250
Fig. 81
Pos: 48.37 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI-Pr ess-Wickelvorric htung/Grundbild/Besc hreibung der Grafi ken (II) für Funktionst asten(F1 bis F6) @ 52\mod_1 289296679390_78.doc x @ 502974 @ @ 1
Description of the symbols (II) for the function keys (F1 to F6)
Net feeding manual mode Net is fed when actuating the function key
Start transfer / wrapper mode
The transfer and if required the wrapping
process are started if the function key is
activated.
Start setting down bales
The depositing of the bale is started
manually if the function key is activated.
Pre-select pick-up valve
The activated setting is shown.
Pre-select valvecutter base
adjustment
Menu level of the machine
By actuating the function key the menu level
of the machine will be called.
GO
Start/ continue wrapping
process
The wrapping process start/is continued
when the function key is activated
To Next Page
Loading...
Need help?
General
