KRONE ISOBUS Terminal
114
Description of the symbols (II) for the function keys (F7 to F12)
Tying mode, manual triggering
(net)
The current status is displayed
Tying mode, automatic
triggering (net)
Manual operation
The main menu “manual operation” is active
when the function key is activated.
Setting the customer counter
The menu 2-1 "Customer counter" is
displayed when actuating the function key
(for settings see menu 2-1 "Customer
counter”).
0
Release holding arms
The holding arms are released when the
function key is activated (only for recognized
torn sheet)
Close holding arms
When the function key is pressed, the
holding arms are closed (only for recognized
torn sheet).
Pos: 48.38 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1
To Next Page
Loading...
