KRONE ISOBUS Terminal
169
Pos: 48.158 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI- Press-Wickelvorric htung/Hauptmenüs/ Hauptmenü 4 Service/B28 P osition Höhe Wic kler einstellen @ 61\mod_12 99152864312_78.doc x @ 570750 @ @ 1
Setting B28 Height Wrapper:
CC000306
Fig. 126
Caution!
The parking position of height wrapper must be approached and saved.
Note
They can only be saved if the bar is in the lowest or highest rectangle of the bar display.
Lifting Wrapper
• Use the softkey to move the wrapper upwards as long as the softkey is activated
Lowering Wrapper
• Use the softkey to move the wrapper downwards as long as the softkey is
activated
Saving Value (When Wrapper is in Parking Position):
• Press function key until the symbol appears briefly in the upper line
Note
The value is saved when the right bar has adopted the value of the centre bar.
Pos: 48.159 /Layout Mod ule /---------- -----Seitenumbruc h------------- --- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1
To Next Page
Loading...
