Operation
217
Pos: 55.39 /Abkürzun gen /Abkürzungen sprac hneutral/Rundbal lenpressen/Compri ma CV 150 XC (fett) @ 83\mod_13178 19279881_78.doc x @ 731653 @ @ 1
Comprima CV 150 XC
Pos: 55.40 /BA/Bedienun g /Rundballenpresse/ Bild Anlagebleche montieren CV150 @ 137\mod_13 53936023004_78.doc x @ 1224121 @ @ 1
HDC00067
1
2
HDC00063
3
Fig. 156
Pos: 55.41 /BA/Bedienun g /Rundballenpresse/ Text Anlagebleche m ontieren alle Maschinen @ 137\ mod_1353912825978_ 78.docx @ 1222840 @ @ 1
If the completed bales do not fall out of the front bale chamber, two ejector plates (1) can be
assembled right and left in the tailgate of the machine.
• Install the ejector plates (1) with the screws (2) on the insides of the bale chamber into the
existing bore holes.
• If the completed bales do even not fall out of the front bale chamber after having installed
the ejector plates (1), remove the sliding plates (3) from the machine housing right and left.
The ejector plates (1) can be ordered with suitable screws from KRONE spare part storage by
stating the following spare parts no.:
Pos: 55.42 /BA/Bedienun g /Rundballenpresse/ Tabelle Ersatztei le Anlagebleche F125/ 155 @ 137\mod_135359371 4768_78.docx @ 1221214 @ @ 1
Units Spare part Spare parts no.
2 Ejector plate 2754790
Pos: 55.43 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1
To Next Page
Loading...
