Operation
258
Pos: 55.168.33 /BA/Bedi enung /Rundballenpr esse/Ballenwic kler/Folienrollengr öße @ 75\mod_1309265341 524_78.docx @ 661314 @ @ 1
KR001230
76
76
3
2
CP400011_1
1
Fig. 198
Two sheet sizes can be used:
750 and 500 mm.
Sheet rolls with the following dimensions achieve the best results
• 750 mm wide
• Core Ø 76 mm
• maximum sheet roll diameter 260 mm
We recommend using quality brands, for example DLG accepted sheets.
Note
The following worksteps must be performed on both sheet holders, as the sheet holders must
always have the same setting.
• To release the tension on the section rollers, turn the lever (1) to the right until the locking
lever (2) falls behind the lower guidance (3) and secures it.
Pos: 55.168.34 /Layout Module /------ ---------Seitenumbruc h---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1
To Next Page
Loading...
