Maintenance
317
Pos: 59.167 /Abkürzu ngen /Abkürzungen sprac hneutral/Rundbal lenpressen/Compri ma CV 210 XC @ 140\mod_1355302382 014_0.docx @ 1248291 @ @ 1
Comprima CV 210 XC
Pos: 59.168.1 /BA/W artung/Rundballenpres se/Hydrauliktan k/Hydrauliktank_ Bild_CV 210 XC, CF 155 HD, CV 150 HD @ 188\m od_1380178460945_ 78.docx @ 1611240 @ @ 1
COM00305_1
1
2
40 l
45 l
3
Fig. 250
1) Scale 2) Ventilation filter
3) Drain screw
Pos: 59.168.2 /BA/W artung/Rundballenpres se/Hydrauliktan k/Ölstandskontro lle_CV 210 XC, CF 155 HD, CV 150 HD @ 188\mo d_1380185470595_7 8.docx @ 1611352 @ @ 1
To check the oil level:
Prerequisite
– The tailgate must be closed.
• Read off the oil level on the scale.
If the scale shows a level between 40 and 45 l, the oil level is correct.
If the scale shows a level below 40 l:
• Clean the area around the ventilation filter.
• Top up the oil up to the 45 l mark using the ventilation filter.
• Before refilling, clean the area around the fi ller plug (2).
Pos: 59.168.3 /BA/W artung/Rundballenpres se/Ölwechselinter vall Comprima @ 60\ mod_1298295449413_78. docx @ 564895 @ @ 1
Oil Changing Interval:
• Every 500 operating hours
• At least after each season
Pos: 59.168.4 /BA/W artung/Rundballenpres se/Hydrauliktan k/Ölwechsel Comprim a_CV 210 XC, CF 155 HD, CV 150 HD @ 188\mod_138 0206633766_78.doc x @ 1612414 @ @ 1
Oil change:
Prerequisite
– The tailgate must be closed.
Collect escaping oil in a suitable container.
• Unscrew the drain screw and drain the oil.
• Screw in the drain screw.
• Pour in fresh oil up to the 45 l mark on the scale using the ventilation filter.
Pos: 59.169 /Layout Mod ule /---------- -----Seitenumbruc h------------- --- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1