Safety
54
Pos: 40.9 /BA/Einlei tung/Technische Date n/Rundballenpress e/Technische Daten Com prima CV 150 XC @ 65\mod_13013011 66541_78.docx @ 588191 @ @ 1
Comprima CV150 XC
Axle Tandem axle (axle base 1100)
Permissible weights
see information listed on the identification
plate
Pick-up width 2150 mm
Width approx. 2960 mm
Track width 2455 mm
Tyres 500/50-17 10 PR
500/55-20 12 PR
Length approx. 7239 mm
Height approx. 3080 mm
Bale dimensions Diameter approx. 1000 - 1500 mm
Width approx. 1200 mm
Power requirement approx. 51 kW (70 PS)
Drive speed (PTO shaft) 540 r.p.m.
Max. permissible operating pressure of
hydraulic system
200 bar
max. Oil temperature 80°C
Delivery rate hydraulics min. 30 l/min max. 60 l/min
Electr.
connections
Lighting 12 volt – 7-pole connector
Operation 12 volt – 3-pole connector
Net max. Width 1300 mm
Sleeve length 1250 - 1330 mm
Sleeve diameter ø 75 - 80 mm
Roll diameter max. 310 mm (3000 m roll)
Sheet Width 2 x 750 mm (500 mm also possible)
Pre-stretch 50% or 70%
Sleeve diameter ø 75 - 80 mm
Roll diameter max. 260 mm
Overload protection system (universal shaft)
Cam-type clutch 540 rpm
1950 Nm (17 blades)
2300 Nm (26 blades)
Pos: 40.10 /BA/Einlei tung/Technische Dat en/Rundballenpres se/Technische Daten Co mprima CF 155/CV 150 XC_Hydr aulikanschlüsse @ 226\ mod_1392657293830_78. docx @ 1825261 @ @ 1
Hydraulic Connections
Raising/lowering the pick-up or blade base 1 x single-action control unit
Pos: 40.11 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1
To Next Page
Loading...
Need help?
General
