MSA SUPREMA - 1 General Information

REV 0, June 2005 Page 15
Operation Manual SUPREMA
1. General Information
1. General Information
Safety Advice
The SUPREMA Gas Warning Unit is a product supporting life and health!
• This manual must be carefully read, understood and followed by all individuals who have
or will have the responsibility for selecting, using, servicing or maintaining this product.
• This manual contains instructions for the optimal use of the product as well as important
safety information.
• Before use, the acting persons have to decide in accordance with this manual, whether
the product is suitable for the intended application
Liability Information
• The liability of MSA AUER is excluded if the product is not used appropriately and for the
intended purpose. Choice and use are in the sole responsibility of the acting persons.
• Warranties also as guarantees made by MSA AUER with respect to the product are
voided, if it is not used, serviced or maintained in accordance with the instructions in this
manual.
• The above corresponds to the terms and conditions of sale regarding the warranty and
liability of MSA AUER. It does not alter them.
Maintenance Advice
• This product must be inspected and maintained in regular intervals by trained specialists,
records are to be kept. For service and repairs original MSA AUER spare must be used
only. Inspections and maintenance must be made exclusively by authorised service
shops or MSA AUER. The authorised service shops are responsible for procurement of
valid technical information for the product, components thereof and maintenance
instructions. Modifications to the product or components thereof are not permissible and
violate the approvals.
• The liability of MSA AUER extends exclusively to service and maintenance made by MSA
AUER.
Handling Instructions
This unit contains assemblies that are sensitive to static electricity. The unit should be opened
for maintenance or repair only by technically trained personnel..
Electrostatic discharge caused by touching the assemblies without protection should be avoided.
The warranty is void in the event of damage to components by electrostatic discharge.
Attention!
Follow the Handling Instructions.
Components Subjectto Damage fromStatic Electricity!