MSA SUPREMA - Figure 6-5: Module Types Listing; Figure 6-6: Power Supplies Listing; Figure 6-7: Transfer Program Suprema_Configuration.exe

REV 0, June 2005Page 166
Operation Manual SUPREMA
6. Startup
Module Types
This listing is only for information about which modules can be integrated into the system.
View of the “module types” listing:
Figure 6-5: “Module types” listing
Voltage supplies
The voltage supplies used are entered by ticking the relevant box.
View of the “power supplies” listing:
Figure 6-6: “Power supplies” listing
Transfer program SUPREMA_Configuration.exe
The transfer program serves as data transfer between the SUPREMA system and a configuration
database.
Figure 6-7: Transfer program “SUPREMA_Configuration.exe”
Selection of a configuration database
First, the user has to choose a configuration database. This is made either by direct input of
path and file name in the text field provided, or by means of the “browse“ button. The actions
described below refer to this database.
Getting configuration data from a SUPREMA System
By clicking the button “get from SUPREMA”, the configuration data of the SUPREMA system
connected is transferred to the PC and stored in the selected database. All data which was
stored before is overwritten by this action.