● For transferring files to FTP servers, the overwrite method or rename method is selectable. As
tentative file names are renamed after the completion of the transfer in the rename method, it is
possible to confirm that the files have reached to FTP servers successfully.
■
Operand [S3] setting (for file transfer)
● Specify the starting address of the device area that stores the string data that indicates a
source file name, or a character constant.
Setting
item
Settings
S3
Source File
Name
For PUT
Specify a file name in an SD memory card with an absolute path.
For GET
Specify a file name from the home directory of a user which logs in FTP servers
with a relative path.
(Note 1) Wild cards "*" and "?" are usable for file names.
(Note 2) An error occurs when the number of files which match wild cards 101 or more.
■
Operand [S3] setting (PUT operation for a device)
● Specify the starting address of the device area that stores the string data that indicates
source device settings, or a character constant.
Setting
item
Settings
Setting
range
S3
Source
device
● Global devices
Specify device code + device number.
● Local devices
"PB" + PB number + "_" (underscore) + device code + device
number
Devices that can be specified
Global devices Local devices
WX WX
WY WY
WR WR
WL WL
DT DT
LD LD
Number of
transferred
data
(data
amount)
Specify the number of transferred data (number of data).
* The number of data that can be transferred simultaneously is 1MB
for all 16 IDs. However, they are calculated with data after
conversion.
1 to 524228
(512k data)
Conversion
method
Specify a conversion method.
17.12 FTPcSET (FTP Client Transfer Setting)
WUME-FP7CPUPGR-12 17-63