82D-43
AFTER REPAIR Carry out a complete check with the diagnostic tool.
V1
MR-453-X79-82D000$170.mif
ACCESS – SAFETY
Fault finding – Fault location chart
82D
UCH
Vdiag No.: 09
ALP 9
CONTINUED 4
Check that the starter operates correctly.
Replace the starter if necessary (see MR 451, Mechanical, 16A, Starting - Charging, Starter: Removal -
Refitting).
If the fault is still present, check the timing belt (see MR 451 Mechanical, 11A, Top and front of engine, Timing
belt: Removal - Refitting).
D
To Next Page
Loading...
