82D-45
AFTER REPAIR Carry out a complete check with the diagnostic tool.
V1
MR-453-X79-82D000$170.mif
ACCESS – SAFETY
Fault finding – Fault location chart
82D
UCH
Vdiag No.: 09
ALP 11
The opening elements locking/unlocking button indicator light
remains lit
NOTES
Only refer to the customer complaints after performing a complete check using
the diagnostic tool.
Use the Wiring Diagrams Technical Note for DUSTER.
Set the stalk to position 0.
Check the condition and connection of the connectors of the central door locking switch, component code 123
and of the passenger compartment fuse box, component code 1016.
If the connectors are faulty and if there is a repair procedure (see Technical Note 6015A, Repairing electrical
wiring, Wiring: Precautions for repair), repair the connector, otherwise replace the wiring.
Check the insulation to + 12V feed of the following connection:
• LPD between components 123 and 1016 (for a left-hand drive vehicle).
• LPG between components 123 and 1016 (for a right-hand drive vehicle).
If the connection or connections are faulty and there is a repair procedure (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace it.
If the fault is still present, contact the Techline.
UCH_V09_ALP11
To Next Page
Loading...
