85A-11
WIPING - WASHING
Rear screen wiper arm: Removal - Refitting
REAR SCREEN WIPER
85A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Switch on the ignition.
a Turn the wiper stalk from (0) to (1), and then from (1)
to (0).
a Switch off the ignition.
a Mark the position of the wiper arm.
II - REMOVAL OPERATION
a Pull down the nut cover (5) .
a Remove the nut (6) from the wiper arm.
a Remove the wiper arm using the (Ele. 1781).
a Remove the rear screen wiper blade (see Rear
screen wiper blade: Removal - Refitting) .
REFITTING
I - REFITTING PREPARATION OPERATION
a Switch on the ignition.
a Turn the wiper stalk from (0) to (1), and then from (1)
to (0).
a Switch off the ignition.
II - REFITTING OPERATION
a Refit the rear screen wiper blade.
a Refit:
- the wiper arm,
- the wiper arm nut.
a Fit the nut cover.
Special tooling required
Ele. 1781 Tool for removing windscreen
wiper arms
WARNING
To ensure that the wiper arms can travel
smoothly, the wiper motor must be initialised.
145588
WARNING
To ensure that the wiper arms can travel
smoothly, the wiper motor must be initialised.