2.2
SEL-400 Series Relays Instruction Manual Date Code 20171006
PC Software
QuickSet Setup
relays that you may be required to set. If later you find that additional drivers are
required, QuickSet provides an easy method to request new drivers and updates
(see Updating QuickSet on page 2.2).
QuickSet is also available on CD upon request.
Updating QuickSet
The QuickSet software consists of a core application plus driver files for individ-
ual devices. As new device firmware versions are released, you may need to
update QuickSet to add new driver files. This may be accomplished several ways:
➤ When the Enable Update Notifications check box is selected in the
Tools > Options menu of SEL Compass, the Compass software will
automatically check for updates on a specified schedule and facilitate
the update process.
➤ The Update icon on the QuickSet startup screen starts SEL Compass
and checks for updates.
➤ The Install Devices button on the Settings Editor Selection window
starts SEL Compass and presents a menu of available drivers.
➤ Check for updates in the Help menu starts SEL Compass and
checks for updates.
An Internet connection is required to add new drivers and to receive update noti-
fications.
Serial Communication Parameters
QuickSet can communicate with a relay via any relay serial port set to SEL proto-
col or via Ethernet. Use the Communication Parameters dialog box to config-
ure relay communications settings.
Step 1. Select the Communication menu on the top QuickSet toolbar.
Step 2. Click Parameters to open this dialog box.
Figure 2.1 shows the QuickSet Communication Parameters dialog box.
To Next Page
Loading...
