manipulation of a time server.
To configure NTP Access Restrictions:
1.
Navigate to MANAGEMENT > NETWORK: NTP Setup.
2.
In the Actions panel, click Access Restrictions:
3.
The NTP Access Restrictions Status window will display:
To ADD or EDIT an access restriction, click the PLUS icon or the Change button,
respectively, and proceed to Step4. below.
To DELETE an access restriction, click the corresponding Delete button, and con-
firm by clicking OK.
4.
The NTP Access Restrictions window will display:
120
CHAPTER 2 • SecureSync User Reference Guide Rev. 26
2.14 Configuring NTP
To Next Page
Loading...
