Spectracom SecureSync User Manual

For more information on SNMP, see "SNMP" on page84.
4.2.5 Setting Up Email Notifications
The Email Setup window provides a means to configure SecureSync with the necessary settings
to interface it with Exchange email servers and Gmail.
To set up Notification Emails:
1.
Navigate to MANAGEMENT> OTHER: Notifications.
2.
In the Actions panel of the Notifications screen, click * Email Setup.
3.
The Email Setup window will display:
The Email Configuration box provides two example configuration files. One is for inter-
facing SecureSync with an Email Exchange server; and the other is for sending emails
via Gmail:
4.
To configure the applicable example email configuration, delete the comments (“#”)
from each line and replace the “<>” with the appropriate values for your particular
email server (such as the user name and password for your Email server).
4.2 Notifications
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
245

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)