Spectracom SecureSync User Manual

CHAPTER 2 • SecureSync User Reference Guide
29
CHAPTER 2
SETUP
The following topics are included in this Chapter:
2.1 Overview 30
2.2 Unpacking and Inventory 31
2.3 Required Tools and Parts 32
2.4 SAFETY 33
2.5 Mounting the Unit 36
2.6 Connecting Supply Power 38
2.7 Connecting the GNSS Input 41
2.8 Connecting Network Cables 42
2.9 Connecting Inputs and Outputs 43
2.10 Powering Up the Unit 43
2.11 Setting up an IP Address 44
2.12 Accessing the WebUI 53
2.13 Configuring Network Settings 55
2.14 Configuring NTP 95
2.15 Configuring Input References 136
2.16 Configuring Outputs 136

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)