Spectracom SecureSync User Manual

graph, and the status information for the selected time.
3.3.3.2 Determining Your GNSS Receiver Model
Note: All PRISMA SecureSync models are currently shipped with a u-blox M8T
Receiver.
To determine which GNSS receiver model is installed in a SecureSync unit:
Note: If a SecureSync unit is used exclusively as a Stratum2 server, it may not be
equipped with a GNSS receiver at all.
1.
Navigate to TOOLS > SYSTEM: Upgrade/Backup.
2.
In the System Configuration panel, locate the line item GNSS Receiver:
GNSS Receiver Models
Spectracom strives to equip SecureSync with current technology. Depending on the production
date of your SecureSync unit, one of the following GNSS receiver models will be installed in
your unit (if any):
3.3 Managing References
CHAPTER 3 • SecureSync User Reference Guide Rev. 26
187

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)