Spectracom SecureSync User Manual

u-blox
®
M8T
Production dates: Since 2016
Constellations: GPS, Galileo, GLONASS, BeiDou, QZSS
Other characteristics:
Client A-GPS option: Yes
Server A-GNSS option: Yes
Resurvey: Automatic, after being moved and rebooted — can be changed, see "Setting
GNSS Receiver Dynamics" on page192.
Multi-GNSS reception: Yes, within these permissible settings:
GPS Galileo GLONASS Beidou
X X – –
X X X –
X X – X
X – X –
X – – X
– X X –
– X – X
– – X X
Note: The augmentation systems SBAS and QZSS can be enabled only if
GPS operation is configured.
Note: As of System software version 5.7.0, the Multi GNSS Option is no
longer required. After an upgrade, the previous constellation settings will
be maintained.
Trimble Res-SMT™ GG
188
CHAPTER 3 • SecureSync User Reference Guide Rev. 26
3.3 Managing References

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)