Spectracom SecureSync User Manual

2.
A window will display for the specific option you chose.
Via the GEAR button, INFO button, or Edit button you can access and edit more detailed
settings.
4.5.1.9 NTP Status Monitoring
SecureSync's NTP Status Summary provides a means to monitor NTP status and performance
parameters relevant to your SecureSync at a glance.
1.
To access the NTP Status Summary panel, navigate to MANAGEMENT > NETWORK: NTP
Setup.
2.
The NTP Status Summary panel is at the lower left of the screen. The panel contains the fol-
lowing information:
292
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
4.5 Quality Management

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)