Spectracom SecureSync User Manual

The Remote Log Server panel, which is where you set up and manage logs on one or more
remote locations. See also: "Setting up a Remote Log Server" on page315.
4.5.2.4 Displaying Individual Logs
Next to displaying a Logs overview (see "The Logs Screen" on page308), it is also possible to
access individual SecureSync logs:
1.
From the TOOLS drop-down menu, select the desired Logs category (for example,
“Alarms”, or “Events”) from the right-hand column.
– OR –
1.
Access the Logs screen through the MANAGEMENT > OTHER: Log Configuration drop-
down menu:
310
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
4.5 Quality Management

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)