Spectracom SecureSync User Manual

2.
The Logs screen will appear. It is divided into three panels:
The Logs panel
The Logs panel on the right-hand side provides a logs overview, displaying the status of all
SecureSync logs.
To read a log, click the corresponding INFO button.
To configure a log, click the corresponding PENCIL button.
To clear a log, click the X-button.
Note: The Clear File feature does not delete any of the logs that have been sent to
and stored in a Syslog server.
A green indicator lamp shows if events of the corresponding log category are stored remotely
or locally.
The Logs Actions panel
The Actions panel on the upper-left corner of the Logs screen allows you to perform batch
actions on your logs:
Save and Download All Logs—Save and download all the logs on SecureSync. See also:
"Saving and Downloading Logs" on page311.
Clear All Logs—Clear all the logs on SecureSync. See also: "Clearing Selected Logs" on
page318.
Restore Configuration—Restore all log configurations to their factory settings. See also:
"Restoring Log Configurations" on page317.
The Remote Log Server panel
4.5 Quality Management
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
309

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)