Spectracom SecureSync User Manual

3.
The Edit System Time window will display. Select the checkbox Synchronize to Battery
Backed Time on Startup:
4.
Click the Submit button.
3.2.2 Timescale Offset(s)
Timescale offsets account for fixed differences between timescales, in seconds. Timescale offsets
may change because of leap seconds, see "Leap Seconds" on the facing page.
3.2.2.1 Configuring a Timescale Offset
To configure a timescale offset to the System Time:
1.
Navigate to MANAGEMENT > OTHER: Time Management.
2.
In the Offsets panel on the left, click the GEAR icon in the top-right corner.
3.
The Edit GPS Offset window will display. Enter the desired GPS Offset in seconds, and
click Submit.
154
CHAPTER 3 • SecureSync User Reference Guide Rev. 26
3.2 System Time

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)