Note: The Delete button in the Edit Leap Second window will only be visible if a
leap second has been set beforehand.
3.2.4 Local Clock(s), DST
The Local Clock feature allows for maintaining one or several local times. These times will reflect
a time offset, thereby accounting for Time Zone, and DST (Daylight Savings Time) correction.
3.2.4.1 Adding a Local Clock
To add a Local Clock:
1.
Navigate to MANAGEMENT > OTHER: Time Management.
2.
Click the PLUS icon in the Local Clocks panel in the Time Management screen.
3.
The Local Clock pop-up window will display.
4.
Enter a Name for your local clock.
The name must be between 1 and 64 characters long; spaces are allowed.
The name can be any meaningful name that helps you know your point of ref-
erence (for example: “NewYork”, “Paris” or “EasternHQ”, etc.).
This name will be used as cross-reference drop-down in the applicable Input or
Output port configuration. Please note the following limitations apply to this
option:
Note: Acceptable characters for the name include: A-Z, a-z, 0-9, (-
+_) and space.
158
CHAPTER 3 • SecureSync User Reference Guide Rev. 26
3.2 System Time
To Next Page
Loading...
