Spectracom SecureSync User Manual

Figure 1-1: SecureSync front panel layout (SAASM version)
1.3.1 Front Panel Keypad, and Display
To simplify operation and to allow local access to SecureSync, a keypad and a 4-line LCD
information display are provided on the front panel of the unit.
The front panel keypad and display can be used to configure basic network settings e.g., en-
/disabling DHCP, or setting an IP address and subnet mask.
Note: If the keypad be locked, see "Troubleshooting – Keypad Is Locked" on
page341.
1.3.1.1 Using the Keypad
The functions of the six keys are:
tu arrow keys: Navigate to a menu option (will be highlighted)
pq arrow keys: Scroll through parameter values in edit displays
ü ENTER key: Select a menu option, or load a parameter when editing
Ò BACK key: Return to previous display or abort an edit process
1.3.1.2 Navigating the Front Panel Display
After power initialization, press any key to go to the “Home” display. As shown in the illus-
tration "Front panel menu tree" on the facing page, several status and setup displays are
4
CHAPTER 1 • SecureSync User Reference Guide Rev. 26
1.3 SecureSync Front Panel

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)