Spectracom SecureSync User Manual

4.7.5.3 Removing Other Files From the CF Card
While the restore and clean functions reset the configuration parameters, they do not remove
any files that may have been uploaded via FTP. One way to delete these files, if any, is via the
Update System Software functionality under TOOLS > SYSTEM: Upgrade/Backup.
The Clean Upgrade function wipes the CF card clean and recreates every system file. An
upgrade alone does not.
Note: When selecting both the Perform Upgrade checkbox, and the Clean
Upgrade checkbox, Force Upgrade will also be automatically selected, as neces-
sary for this process.
4.7.5.4 Further Reading
For more information on sanitization, see:
"Deleting the GNSS Receiver Position" on page197.
Certificate of Volatility for SecureSync:
http://manuals.spectracom.com/Other/SecureSync_CertificateOfVolatility.pdf
Certificate of Volatility for SecureSync Option Cards:
http://manuals.spectracom.com/Other/SecureSync_OptionCards_
CertOfVolatility.pdf
Additional information regarding Sanitization and Volatility may be found in the Spec-
tracom knowledge base support.spectracom.com
Contact Spectracom Technical Support (see "Technical Support" on page559).
4.7 Resetting the Unit to Factory Configuration
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
331

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)