GR antenna ok: The antenna coax cable was connected at this time or an open or short
in the antenna cabling was occurring but is no longer being detected.
TimeKeeper Log
Displays log entries related to TimeKeeper (if activated).
Update Log
Displays log entries related to software updates that have been performed.
4.5.2.2 Local and Remote Logs
SecureSync logs are all stored internally by default. With the exception of the NTP log, all logs
can also be configured to be stored externally, if so desired.
The log entries for the logs can also be configured to be automatically sent to a Syslog Server
for external log storage. In order for these logs to be sent to a Syslog server, each desired log
needs to be configured for Syslog operation. With the exception of the Authentication and NTP
logs, all log setup options can be configured from the Logs Configuration page.
Note: The NTP log has no available configuration options.
In each log, entries appear with the most recent events first (i.e. in reverse chronological order,
starting from the top).
To set up a remote log server, see "Setting up a Remote Log Server" on page315.
4.5.2.3 The Logs Screen
The Logs Screen not only provides a status overview of all log types, but also allows for all logs
to be configured.
To access the Logs Screen:
1.
Navigate to MANAGEMENT > OTHER: Log Configuration.
308
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
4.5 Quality Management