Spectracom SecureSync User Manual

Note: To follow this procedure, you must be logged in as the spadmin user. If
you are unable to login as spadmin, follow the procedure outlined in "Lost Pass-
word" below.
If the password has already been changed from the default value, but the current value is no
longer known, the administrator password can be reset back to the factory default value, see
"Lost Password" below. Once reset, it can then be changed to a new desired value via the
WebUI.
Changing the admin password
To change the admin password from a known value to another desired value:
1.
Navigate to MANAGEMENT > OTHER: Change My Password.
2.
The Change Password window will display.
3.
In the Old Password field, type the current password.
4.
In the New Password field, type the new password.
Note: The new password can be from 8 to 32 characters in length.
5.
In the Repeat New Password field, retype the new password.
6.
Click Submit.
For more information, see also "Managing User Accounts" on page247.
4.3.2.3 Lost Password
If the current spadmin account password has been changed from the default value and has
been forgotten or lost, you can reset the spadmin password back to the factory default value of
admin123 .
4.3 Managing Users and Security
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
253

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)