Spectracom SecureSync User Manual

of the option card identified above. The option card’s Status Summary panel opens:
All the inputs and/or outputs of this option card are listed in the Status Summary panel.
In accordance with the Signature Control setting, and the Lock Status, the current signal state for
an output is indicated as:
ENABLED (green); or
DISABLED (orange)
The current state of an input signal is indicated as:
VALID (in green); or
INVALID (in red)
The Status Summary panel will be refreshed automatically every 30seconds. Click the Refresh
button (circling arrows) on the right to refresh the status instantaneously. A slight refreshment
delay is normal (the duration depends on the configuration of your system.)
5.2.1.5 Verifying the Validity of an Input Signal
The HOME page of the SecureSync WebUI provides quick access to the status of all inputs via
its Reference Status panel.
350 SecureSync User Reference Guide
APPENDIX

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)