1.1 Getting Started
Welcome to the SecureSync User Reference Guide.
Where to start:
First-time users: "SecureSync Introduction" below.
Users with some knowledge of Time and Frequency Servers: "Overview" on page30.
If your unit is up and running and you want to change a setting: "Managing Time" on
page145, or "System Administration" on page235.
1.2 SecureSync Introduction
SecureSync
®
is a security-hardened 1-rack unit network appliance designed to meet rigorous
network security standards and best practices. It ensures accurate timing through multiple ref-
erences, tamper-proof management, and extensive logging. Robust network protocols are used
to allow for easy but secure configuration. Features can be enabled or disabled based on your
network policies. Installation is aided by DHCP (IPv4), AUTOCONF (IPv6), and a front-panel
keypad and LCD display.
The unit supports multi-constellation GNSS input (SAASM GPS receivers, supporting L1/L2,
available for authorized users and required for the US DoD are available), IRIG input and
other input references. The unit is powered by AC on an IEC60320 connector. DC power as
back-up to AC power, or as the primary input power source, is also available.
SecureSync combines Spectracom’s precision master clock technology and secure network-cent-
ric approach with a compact modular hardware design to bring you a powerful time and fre-
quency reference system at the lowest cost of ownership. Military and commercial applications
alike will benefit from its extreme reliability, security, and flexibility for synchronizing critical
operations.
An important advantage of SecureSync is its unique rugged and flexible modular chassis that
can be configured for your specific needs. Built-in time and frequency functions are extended
with up to six input/output modules.
You can choose from a variety of configurable option cards, each with an assortment of
input/output timing signal types and quantity, including additional 1PPS, 10 MHz, timecode
(IRIG, ASCII, HAVE QUICK), other frequencies (5MHz, 2.048MHz, 1.544MHz, 1MHz), Pre-
cision Timing Protocol (PTP) input/output, multi-Gigabit Ethernet (10/100/1000Base-T),
2
CHAPTER 1 • SecureSync User Reference Guide Rev. 26
1.1 Getting Started
To Next Page
Loading...
Need help?
General
