Spectracom SecureSync User Manual

3.
Check the box labeled HTTP/HTTPS if you want to enable RADIUS, or uncheck the box if
you want to disable RADIUS.
4.
If you are enabling the service, in the Retransmit Attempts field, select the number of
retries for SecureSync to communicate with the RADIUS server (default = 0).
5.
Click Submit.
4.3.4.2 Adding/Removing a RADIUS Server
To add a RADIUSauthentication server, or remove a server from the list:
1.
Navigate to MANAGEMENT > OTHER: Authentication.
2.
In the Actions panel on the left, click RADIUS Setup. The RADIUS Setup window will be dis-
played:
4.3 Managing Users and Security
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
263

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)